This results in an inconsistent state of the circuit and the HifiBerry card isn’t detected by the Pi anymore. The new Pi release uses a new power management circuit that doesn’t ramp up the voltages as clean as all previous versions did. If it says “Raspberry Pi 4 Model B Rev 1.5”, the HifiBerry card might not work as expected. On your Raspberry Pi, run the following command: cat /proc/device-tree/model. If needed, go to: Settings (cogwheel lower right corner) > Playback > Audio output > Audio Device and re-select your audio-card. pull the power-cable for 10 seconds and then re-insert power to boot. My HifiBerry card (or clone) is not detected after installation and reboot with aplay -l command, what could be wrong?Ī1: Sometimes the card is not detected after upgrade, try doing a hard reboot, i.e. If your device is missing, and reboot does not fix it, powercycle the RPi and try again. Reboot if it does not fix it, and verify setting is still there. Go to the GUI and re-select your Audio device under Settings (cogwheel lower right corner) > Playback > Audio output > Audio Device. That is not a bad thing per se, it just means you didn’t link any “cloud players”.Īfter upgrading to 4.4.0 (or later), I am getting "ALSA lib pcm_dmix.c:1075:(snd_pcm_dmix_open) unable to open slave". Bedroom, Kitchen): MarantzĭEVICE: Error loading cloud players from HTTP status 403 Please visit and enter the claim token: claim-xxxxxxxxxxxxxxxxxxxx #Plexamp download mac install#I got an error during the first Plexamp install and start $ node /home/xxx/plexamp/js/index.js When starting Plexamp (4.3.0), I get this: ( sudo systemctl enable rvice & sudo systemctl restart rvice) Rebooting the RPi a second time sometimes also helps (or restarting/veirfying the PlexAmp service), this of course will only help if correct audio device is already chosen. Go into the plexamp settings (via the web UI) and select the right audio output device. This is the case for all file types tried. However the moment I select a song to play, it either keeps loading forever (black screen with loading circle) or it flips back to the album overview without starting the selected song. #Plexamp download mac upgrade#If there is a new version, and script has been updated, you can upgrade by re-running the script, and reboot.įor hostname-change, please make sure to reboot in-between, or you might face issues. The script can be re-run to fix configuration/setup errors, just say no/bypass the sections you do not want to re-run! Now play some music! Or control it from any other instance of Plexamp. Now the card will show up in the list, and you can choose it! NOTE!!! DietPi is best-effort, and might not work.Īfter SSH-ing to the SBC, on the "Raspberry Pi OS", change to root ( sudo -i) and run script with:īash > Playback > Audio output > Audio Device.Īs an example, if you have chosen the “ Digi/Digi+“ option during install in the script, pick “Default” if the card is not showing, then reboot the pi. SSH access on "DietPi OS" as user: dietpi/dietpi and as root: root/dietpi Then unmount and insert card into Raspberry Pi and boot it. On MacOS, after re-mount of micro-SD-card, run: touch /Volumes/boot/ssh. On most Linux-distros, after re-mount of micro-SD-card, run: touch /media/$user/boot/ssh. Create or copy a file called ssh in /boot.This will produce what looks like a string of random characters, which is actually an encrypted version of the supplied password.įor security reasons, as of the November 2016 release, Raspbian OS has the SSH server disabled by default. To generate the encrypted password, the easiest way is to use OpenSSL on a Raspberry Pi that is already running (or most any linux you have running) – open a terminal window and enter:Įcho ‘mypassword’ | openssl passwd -6 -stdin #Plexamp download mac password#This file should contain a single line of text, consisting of username:encrypted-password – so your desired username, followed immediately by a colon, followed immediately by an encrypted representation of the password you want to use. To set up a user on first boot on headless, create a file called userconf or userconf.txt in the boot partition of the SD card. The advanced option (cogwheel) will allow you to add both options before writing to SD-card.įor security reasons, as of the spring 2022 release, Raspbian OS no longer has a default pi user wit assigned password. This will currently only work with 64-bit capable Raspberry Pi and Pi OS that is 64-bit.įor the below 2 tasks (user/password and SSH-access) the Raspberry Pi imager can be used as an alternative. PlexAmp-installer for Raspberry Pi with ARMv8, 64-bit HW.įor more information and hardware used, see here:Īssumes 64-bit capable Raspberry Pi HW and Pi OS that is 64-bit.Ĭurrently installs/upgrades to: Plexamp-Linux-headless-v4.5.1 Burning the image.īurn the OS-image to the Micro-SD card using Raspberry pi imager, etcher (or app of your choice).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |